Stabilus LIFT-O-MAT 008472 Gas Spring 1.550 Newton

Stabilus LIFT-O-MAT 008472 Gas Spring

The Stabilus LIFT‑O‑MAT 008472 Gas Spring is a high‑performance, precision engineered gas spring designed to provide reliable lift and support in automotive cargo areas. With a force rating of 1,550 Newtons, it delivers the necessary power for smooth operation of rear doors, hatches, and cargo compartments across a range of vehicle models.

Key Technical Specifications

• Model Number: 008472
• Force Rating: 1,550 N (equivalent to approximately 350 lb‑force)
• Length: Variable – typically between 300 mm and 400 mm depending on application
• Diameter: Standard 20 mm shaft with a 10 mm bore for the piston rod
• Operating Temperature Range: –40 °C to +120 °C (ensures performance in extreme climates)
• Material Composition: High‑strength steel alloy with corrosion‑resistant coating; internal gas chamber filled with nitrogen for consistent pressure
• Installation Type: Threaded or snap‑fit mounting options compatible with most automotive chassis designs

Design Features and Engineering Highlights

The LIFT‑O‑MAT 008472 incorporates several design elements that set it apart from conventional gas springs:

• Dual‑Stage Compression: The spring offers a controlled compression profile, providing gentle lift at the start of movement and increased resistance as the load approaches full extension.
• Low Friction Bearings: Integrated ceramic bearings reduce wear and extend service life, ensuring smooth operation over thousands of cycles.
• Sealed Gas Chamber: The nitrogen gas is sealed within a robust chamber that resists leakage, maintaining consistent force output throughout the spring’s lifespan.
• Corrosion‑Resistant Finish: A specialized coating protects against moisture and road salts, making it suitable for both passenger cars and commercial vehicles.

Primary Applications

The LIFT‑O‑MAT 008472 is engineered to support a variety of automotive components that require reliable lift and stability:

• Cargo Area Hatches: Provides the necessary force to open, close, and lock rear cargo doors in sedans, hatchbacks, and SUVs.
• Rear Bumpers and Trunk Lids: Enhances structural integrity by maintaining a steady load on bumper assemblies during impact or routine use.
• Passenger Compartment Doors: Used in certain high‑end models to assist with the opening of rear passenger doors, improving accessibility for occupants.
• Commercial Vehicle Tailgates: Offers robust support for heavy cargo loads and frequent operation cycles typical in delivery trucks and vans.

Installation Guidelines

Proper installation is critical to achieving optimal performance. The following steps outline a standard procedure for mounting the LIFT‑O‑MAT 008472:

1. Preparation: Verify that the mounting surface is clean, free of rust, and properly aligned with the vehicle’s chassis.
2. Threaded Mounting: If using a threaded interface, apply anti‑seize lubricant to the threads before inserting the spring. Tighten to manufacturer specifications (typically 80–100 Nm).
3. Snap‑Fit Attachment: For snap‑fit designs, align the spring’s mounting flange with the corresponding bracket and press firmly until a secure lock is achieved.
4. Alignment Check: Ensure that the piston rod is centered within the housing to avoid uneven wear. Adjust as necessary before final tightening.
5. Functional Test: Operate the hatch or door manually to confirm smooth movement and correct force application. Listen for any abnormal noises indicating misalignment.

Performance Characteristics

The LIFT‑O‑MAT 008472 delivers consistent performance across a wide range of operating conditions:

• Load Capacity: Capable of supporting up to 1,550 N of static load without significant deformation.
• Lifespan: Designed for over 10,000 cycles in typical automotive use, thanks to its low‑friction bearings and sealed gas chamber.
• Temperature Stability: Maintains force output within ±5 % across the specified temperature range, ensuring reliable operation in both hot climates and cold winters.

Compatibility Matrix

The LIFT‑O‑MAT 008472 is compatible with a broad spectrum of vehicle models. Below is a concise compatibility overview based on common automotive platforms:

Maintenance and Longevity Tips

While the LIFT‑O‑MAT 008472 is engineered for durability, routine checks can extend its service life:

• Visual Inspection: Periodically examine the mounting flange and piston rod for signs of wear or corrosion.
• Lubrication Check: Ensure that any exposed bearing surfaces remain lubricated; replace lubricant if it appears dry or contaminated.
• Alignment Verification: Re‑check alignment after major vehicle repairs or modifications to prevent uneven load distribution.
• Temperature Monitoring: Avoid exposing the spring to extreme temperatures beyond its rated range, as this can compromise gas pressure and structural integrity.

Conclusion

The Stabilus LIFT‑O‑MAT 008472 Gas Spring stands out as a reliable, high‑force solution for automotive applications requiring precise lift and support. Its robust construction, consistent performance across temperature extremes, and versatile mounting options make it an ideal choice for both passenger vehicles and commercial fleets. By adhering to the recommended installation procedures and maintenance guidelines, users can enjoy dependable operation for many years.