Stabilus 397013 Gas Spring, boot-/cargo area

Overview

The Stabilus 397013 Gas Spring is a high‑performance hydraulic device engineered to provide reliable support and smooth operation for vehicle rear compartments, including boot, cargo area, and hatchback mechanisms. Designed with precision engineering, this gas spring delivers consistent force output, ensuring effortless opening and secure locking of the rear section.

Technical Specifications

• Force Rating: 455 Newtons (approximately 51.5 kgf)
• Stroke Length: Customizable to match vehicle geometry; typical ranges from 100 mm to 200 mm.
• Operating Temperature: -40 °C to +80 °C, suitable for extreme climates.
• Material Composition: High‑strength steel alloy with corrosion‑resistant coating; internal piston sealed with durable elastomeric O‑rings.
• Mounting Options: Dual‑sided mounting compatible with front and rear brackets, enabling versatile installation on various vehicle models.
• Pressure Range: 4.5 bar to 6.0 bar, ensuring optimal spring performance across different load conditions.

Installation Guide

The Stabilus 397013 is engineered for straightforward installation on a wide range of vehicles. Follow these steps for a secure fit:

1. Preparation: Verify that the mounting brackets are clean and free from debris.
2. Bracket Alignment: Position the spring’s mounting plate against the vehicle’s rear frame, ensuring alignment with pre‑drilled holes.
3. Screw Securing: Tighten the mounting screws to the manufacturer’s torque specification (typically 15 Nm).
4. Piston Adjustment: Adjust the piston rod length to achieve the desired opening angle, then lock in place with the retaining clip.
5. Functional Test: Open and close the rear compartment repeatedly to confirm smooth operation and proper load distribution.

Applications

This gas spring is ideal for a variety of automotive and commercial uses, including but not limited to:

• Passenger Vehicles: Hatchbacks, station wagons, and SUVs requiring reliable boot support.
• Commercial Trucks: Cargo vans and light trucks where secure load management is critical.
• Specialty Vehicles: Off‑road and utility vehicles that demand robust rear suspension systems.

Performance Characteristics

The Stabilus 397013 delivers exceptional performance through its precise force curve, ensuring consistent support regardless of load variations. Key benefits include:

• Low Maintenance: Sealed piston and high‑quality materials reduce wear and extend service life.
• Durability: Resistant to corrosion and temperature extremes, maintaining functionality in harsh environments.
• Quiet Operation: Smooth hydraulic action minimizes noise during opening and closing cycles.

Maintenance Recommendations

To preserve optimal performance, perform the following routine checks:

1. Visual Inspection: Examine for cracks or deformation in the spring housing.
2. Seal Integrity: Verify that O‑rings remain intact and free from oil contamination.
3. Tightness Check: Re‑torque mounting screws every 12,000 km to prevent loosening.
4. Lubrication: Apply a light silicone spray to the piston rod if excessive friction is observed.

Compatibility Matrix

The Stabilus 397013 is compatible with numerous vehicle models, particularly those from major manufacturers that utilize standard rear compartment geometry. Commonly matched vehicles include:

• Renault: Laguna, Clio, Megane, and various truck platforms.
• Volkswagen: Golf, Passat, and Transporter series.
• Ford: Focus, Fiesta, and Transit variants.

Conclusion

The Stabilus 397013 Gas Spring stands out as a reliable, high‑quality solution for rear compartment support across a broad spectrum of vehicles. Its robust construction, precise force delivery, and ease of installation make it an excellent choice for automotive professionals seeking durability and performance without compromising on operational smoothness.