TRW Automotive AfterMarket GIC117 Warning Indicator Cable

TRW Automotive AfterMarket GIC117 Warning Indicator Cable

The TRW GIC117 Warning Indicator Cable is a high‑performance component designed to provide reliable brake pad wear detection for rear‑wheel vehicles, particularly those from the BMW 5 and 7 series. This cable replaces the original OEM part with an equivalent that meets or exceeds factory specifications, ensuring accurate warning signals when brake pads reach critical thickness.

Key Functionalities

• Brake Pad Wear Detection: The cable connects to the brake pad wear sensor, transmitting a signal to the vehicle’s dashboard indicator once the pads have worn below the manufacturer’s minimum threshold.
• Signal Integrity: Constructed with high‑quality shielding and corrosion‑resistant conductors, it maintains signal fidelity even in harsh automotive environments.
• OEM Compatibility: Identical to the original part number 1182065, guaranteeing seamless integration without the need for additional adapters or modifications.
• Durable Construction: The cable’s jacket is made from reinforced thermoplastic, providing resistance against abrasion, heat, and chemical exposure typical of brake systems.

Technical Specifications

Installation Guide

1. Preparation: Safely lift the rear axle and remove the wheel. Locate the existing brake pad wear sensor cable, usually positioned near the rear caliper.
2. Disconnect Old Cable: Carefully detach the old cable from both the sensor housing and the vehicle’s electrical connector. Note any orientation or polarity requirements.
Connect New Cable: Attach the TRW GIC117 cable to the sensor housing, ensuring a snug fit. Then connect the other end to the vehicle’s dashboard wiring harness using the standard plug.
3. Secure and Test: Route the cable along the original path, securing it with zip ties or clips to prevent movement. Lower the axle, reinstall the wheel, and start the engine. Verify that the brake pad wear indicator lights up when pads are worn thin.

Benefits Over OEM Parts

• Cost Efficiency: Provides equivalent performance at a lower price point without compromising quality.
• Availability: Readily stocked by aftermarket suppliers, reducing wait times for replacement.
• Consistent Quality Control: Manufactured under strict quality standards to match OEM tolerances.

Common Applications

The TRW GIC117 cable is ideal for:

• Replacement of worn or damaged brake pad wear sensors in older BMW models.
• Upgrading aftermarket brake systems that require a reliable wear indicator.
• Restoration projects where OEM parts are scarce or expensive.

Maintenance Tips

• Inspect the cable for visible damage such as cuts, kinks, or corrosion every 12 months.
• Avoid excessive bending or pulling during installation to preserve conductor integrity.
• If the warning indicator fails to activate, check for loose connections before replacing the entire cable.

Conclusion

The TRW Automotive AfterMarket GIC117 Warning Indicator Cable delivers dependable brake pad wear detection for rear‑wheel vehicles, particularly those from the BMW 5 and 7 series. With its OEM compatibility, robust construction, and straightforward installation process, it stands as a reliable choice for mechanics and automotive enthusiasts alike who demand safety without compromising on quality.