TRW Automotive AfterMarket PFK407 Pad Fitting Kit

TRW Automotive AfterMarket PFK407 Pad Fitting Kit

The TRW Automotive AfterMarket PFK407 Pad Fitting Kit is a comprehensive solution designed to replace and upgrade the disc brake pads on a wide range of commercial and passenger vehicles. This kit includes every component required for a complete installation, ensuring optimal braking performance and durability.

Key Features & Benefits

• All‑in‑One Kit: Contains four new brake pads, the necessary mounting hardware, and a detailed instruction manual. No additional parts are needed.
• High‑Performance Material: Pads are engineered from advanced composite materials that provide superior friction, reduced wear, and consistent stopping power across varying temperatures.
• Wide Vehicle Compatibility: Specifically designed for models such as the Mercedes-Benz Sprinter 2-T Van, Vito Van, Sprinter 3-T Van, Volkswagen LT 28-35 II Bus, and many others. The kit’s design accommodates a variety of wheel sizes and brake caliper configurations.
• Easy Installation: Each pad is pre‑shaped to fit the caliper geometry, while the included hardware ensures secure attachment with minimal torque adjustments.
• Long‑Lasting Performance: The pads exhibit a low wear rate and maintain consistent braking force over extended mileage, reducing the need for frequent replacements.

Product Composition

The kit is meticulously assembled to provide a hassle‑free experience. It includes:

1. Four Disc Brake Pads: Precision cut to match the caliper and rotor dimensions of the target vehicles.
2. Installation Hardware: Includes all necessary bolts, washers, and retaining clips that meet OEM specifications.
3. Instruction Manual: Step‑by‑step guide featuring diagrams, torque settings, and safety precautions to ensure correct installation.

Installation Overview

While professional assistance is recommended for optimal results, the following steps outline a typical installation process:

1. Remove Existing Pads: Lift the vehicle, secure it on jack stands, and remove the wheel. Detach the caliper from the rotor and carefully slide out the old pads.
2. Prepare New Pads: Inspect each pad for damage or defects. Apply a thin layer of brake grease to the contact surfaces as specified in the manual.
3. Install Hardware: Attach the provided bolts and washers, ensuring they are tightened to the manufacturer’s torque specifications.
4. Mount New Pads: Slide the new pads into place, aligning them with the caliper brackets. Verify that the pads sit flush against the rotor surface.
5. Reassemble Caliper: Reattach the caliper to the mounting bracket and secure it with the supplied bolts.
6. Check Brake Fluid: Inspect the brake fluid level and top up if necessary. Bleed the brakes to remove any air pockets, following the procedure outlined in the manual.
7. Test Drive: After a short test drive, recheck all bolts for proper torque and inspect the pads for any signs of uneven wear or vibration.

Performance Characteristics

The TRW PFK407 pads are engineered to deliver:

• Consistent Friction: Maintains high braking force even after prolonged use, thanks to the advanced composite material blend.
• Reduced Noise & Vibration: Designed with a low‑noise profile that minimizes squeal and chatter during operation.
• Heat Dissipation: The pad composition promotes efficient heat transfer away from the rotor, preventing brake fade in high‑temperature scenarios.

Maintenance & Longevity

Regular inspection of the pads is recommended to ensure optimal performance. Typical wear rates for this kit are approximately 0.5 mm per 10,000 km under normal driving conditions. When pad thickness reaches the minimum safe limit, replacement should be performed promptly to avoid rotor damage.

Compatibility Summary

The TRW PFK407 Pad Fitting Kit is tailored for a broad spectrum of vehicles, including but not limited to:

• MERCEDES‑BENZ Sprinter 2‑T Van & Vito Van
• Volkswagen LT 28‑35 II Bus
• Other commercial vans and light trucks that share the same caliper architecture.

Why Choose TRW?

TRW is a globally recognized authority in automotive braking systems. Their commitment to quality, rigorous testing protocols, and continuous innovation ensure that every component—such as the PFK407 Pad Fitting Kit—delivers reliable performance under diverse operating conditions.

Conclusion

The TRW Automotive AfterMarket PFK407 Pad Fitting Kit offers a complete, high‑performance solution for disc brake pad replacement. With its all-inclusive design, proven material technology, and broad vehicle compatibility, it stands as an essential upgrade for anyone seeking dependable braking performance in commercial or passenger vehicles.