Vaico V95-0279 - Oil Filter

Product Overview

The Vaico V95-0279 Oil Filter is a high‑performance filtration solution designed to protect the engine of a wide range of vehicles. Engineered with precision, this filter captures contaminants while allowing oil to flow freely, ensuring optimal lubrication and longevity.

Key Features

• Superior Filtration Efficiency: Captures particles as small as 0.5 µm, reducing wear on engine components.
• Durable Construction: Made from premium synthetic resin and reinforced with a metal housing for added strength.
• Wide Compatibility: Fits numerous models including BMW, Volvo, Ford, DS, and other OEM vehicles that require the V95-0279 specification.
• Easy Installation: Designed for quick removal and replacement without special tools.
• Long‑Lasting Performance: Maintains pressure drop within acceptable limits throughout its service life.

Compatibility Matrix

The Vaico V95-0279 is engineered to match the original equipment specifications for a variety of vehicles. Below is an overview of common models that accept this filter:

Installation Guide

1. Prepare the Vehicle: Warm up the engine to normal operating temperature, then shut it off and allow it to cool slightly.
2. Drain Existing Oil: Position a drain pan beneath the oil filter housing, remove the old filter, and let any residual oil drain out.
3. Clean the Mounting Surface: Wipe the filter mounting area with a clean rag to ensure proper sealing.
4. Apply Sealant (Optional): Some technicians apply a thin layer of OEM-approved gasket sealant on the threads for added security.
5. Install the Vaico V95-0279: Hand‑tighten the filter until snug, then give an additional 1/4 turn to ensure a leak‑free fit.
6. Refill Engine Oil: Add the recommended oil type and quantity as specified in the vehicle’s service manual.
7. Check for Leaks: Start the engine, let it run for a few minutes, and inspect the filter area for any signs of leakage.

Performance Benefits

The Vaico V95-0279 delivers several tangible advantages that enhance engine reliability:

• Extended Engine Life: By trapping fine particles, it reduces internal wear and corrosion.
• Consistent Oil Pressure: Maintains optimal pressure across the engine’s lubrication system.
• Reduced Maintenance Intervals: Its high‑capacity filter media allows for longer service intervals compared to standard filters.
• Improved Fuel Efficiency: A clean oil flow reduces friction, contributing to better fuel economy.

Material Composition

The filter’s core is composed of a multi‑layer synthetic media that offers high filtration density while preserving oil flow. The housing is constructed from heat‑resistant polymer reinforced with metal inserts at critical stress points, ensuring durability under high temperature and pressure conditions.

Maintenance Recommendations

• Regular Inspection: Check the filter for visible clogging or damage during routine oil changes.
• Replace According to Schedule: Follow the vehicle manufacturer’s recommended interval, typically every 5,000–10,000 miles depending on driving conditions.
• Avoid Over‑tightening: Excessive torque can damage the gasket; use a calibrated wrench if necessary.

Technical Specifications

Conclusion

The Vaico V95-0279 Oil Filter stands out as a reliable, high‑quality component for maintaining engine health across a diverse range of vehicles. Its robust construction, precise fitment, and proven filtration performance make it an essential choice for mechanics and vehicle owners alike who demand durability and efficiency from their engine’s lubrication system.