Van Wezel 18002165 Coolant, Engine Coolant

Van Wezel 18002165 Coolant – Engine Cooling Excellence

The Van Wezel 18002165 Coolant is a high‑performance engine cooling fluid engineered to protect and enhance the longevity of modern internal combustion engines. Designed with advanced chemistry, this coolant delivers superior temperature regulation, corrosion inhibition, and freeze protection for a wide range of vehicles.

Key Technical Features

• Optimal Thermal Conductivity: The formula is calibrated to absorb heat efficiently from the engine block and transfer it to the radiator with minimal loss.
• Extended Service Life: With a proven service interval of up to 60,000 km (or 36 months), this coolant reduces maintenance frequency while maintaining peak performance.
• Corrosion Protection: Proprietary inhibitors safeguard aluminum and cast‑iron components against rust, scale, and pitting, ensuring the cooling system remains leak‑free.
• Freeze & Boil Resistance: The coolant maintains a freeze point of –35 °C and a boil point of +140 °C under normal operating pressures, making it suitable for extreme climates.
• Eco‑Friendly Composition: Formulated without harmful additives such as ethylene glycol, the product is safer for both users and the environment.

Compatibility & Vehicle Coverage

The Van Wezel 18002165 Coolant is specifically formulated to meet the cooling system requirements of a broad spectrum of vehicles. It is fully compatible with:

• Ford Mondeo models (1.6, 1.8, and 2.0 L engines) produced between 1992 and 1996.
• Other European and international cars that require a high‑performance coolant with extended service intervals.
• Commercial and light‑truck engines where reliable temperature control is critical for operational efficiency.

Application Guidelines

1. Preparation: Drain the existing coolant completely. Flush the cooling system with distilled water to remove any residues or contaminants.
2. Mixing Ratio: For optimal performance, mix the Van Wezel 18002165 Coolant with distilled water in a 50:50 ratio unless vehicle specifications dictate otherwise.
3. Filling Procedure: Fill the radiator and coolant reservoir to the recommended level. Ensure no air pockets remain by running the engine until it reaches operating temperature.
4. Bleeding the System: Follow the manufacturer’s bleeding procedure to eliminate trapped air, which can cause overheating or uneven cooling.

Performance Benefits

• Consistent Engine Temperatures: Maintains optimal operating temperatures, preventing both overheating and excessive cooling that could lead to engine wear.
• Reduced Maintenance Costs: Longer service intervals mean fewer visits to the service center for coolant changes.
• Enhanced Fuel Efficiency: Proper temperature regulation improves combustion efficiency, potentially reducing fuel consumption.
• Extended Engine Life: By protecting critical components from corrosion and thermal stress, the coolant contributes to a longer overall engine lifespan.

Safety & Handling Instructions

While the Van Wezel 18002165 Coolant is formulated to be safer than traditional glycol‑based fluids, standard precautions should still be observed:

• Wear gloves and eye protection when handling or mixing.
• Avoid ingestion; if accidental contact occurs, rinse thoroughly with water.
• Store in a cool, dry place away from direct sunlight and incompatible chemicals.

Environmental Impact

The eco‑friendly composition of this coolant reduces the release of toxic substances into the environment. Its biodegradable nature ensures that any accidental spills or disposal are less harmful to ecosystems compared to conventional coolants.

Conclusion

Van Wezel 18002165 Coolant stands out as a reliable, high‑quality engine cooling solution designed for durability, performance, and environmental responsibility. Whether you’re maintaining a classic Ford Mondeo or operating modern commercial vehicles, this coolant delivers the protection and efficiency required to keep engines running smoothly under all conditions.