Van Wezel 3002124 Coolant, Engine Coolant

Van Wezel 3002124 Coolant is a high‑performance engine cooling fluid specifically engineered to maintain optimal operating temperatures in modern internal combustion engines. Designed with advanced chemistry, this coolant delivers superior heat transfer, corrosion protection, and freeze‑point stability for a wide range of vehicles.

Key Features & Benefits

Extended Protection: The formula incorporates anti‑corrosion additives that safeguard engine components such as the water pump, heater core, and radiator from rust and mineral buildup. This prolongs the life of critical cooling system parts.

Optimal Thermal Conductivity: By maintaining a consistent temperature range, the coolant reduces the risk of overheating during high‑load driving conditions, ensuring reliable engine performance and preventing thermal stress on pistons and cylinder heads.

Freeze & Boil Point Stability: The product is engineered to resist freezing at temperatures as low as -40 °C while maintaining a boiling point above 120 °C, making it suitable for both cold climates and high‑performance applications.

Eco‑Friendly Composition: Free from phosphates, the coolant minimizes environmental impact by reducing runoff that could harm aquatic ecosystems. Its biodegradable formulation aligns with modern sustainability standards.

Compatibility & Vehicle Support

The Van Wezel 3002124 Coolant is compatible with a broad spectrum of vehicles, including but not limited to:

• Audi A4, A6, and Avant models
• Skoda Superb
• Volkswagen Passat (including Variant)
• Other European passenger cars that require a 50/50 mix of water and antifreeze.

Engineers recommend using this coolant in conjunction with the manufacturer’s specified radiator and cooling system components to achieve maximum efficiency.

Application & Mixing Guidelines

1. Preparation: Drain any existing coolant from the engine’s cooling system. Flush the system with distilled water if necessary to remove old residues.
2. Mixing Ratio: Combine 50 % Van Wezel 3002124 Coolant with 50 % distilled or de‑ionized water. This ratio balances antifreeze properties with optimal heat transfer.
3. Filling Procedure: Slowly fill the radiator, ensuring no air pockets remain. Use a funnel to prevent spills and maintain cleanliness.
4. Bleeding the System: After filling, run the engine with the heater on high for 10–15 minutes while checking for leaks or bubbles. Bleed any trapped air from the thermostat housing and upper radiator hose.

Maintenance & Longevity Tips

Regular Inspection: Check coolant level every month, especially before long trips. Look for discoloration, sediment, or metallic particles that may indicate internal corrosion.

Flush Intervals: Replace the coolant every 30,000–50,000 km (or as recommended by the vehicle manufacturer) to prevent buildup of contaminants and maintain optimal protection.

Temperature Monitoring: Keep an eye on the engine temperature gauge. If it consistently runs above normal ranges, inspect for potential leaks or radiator blockages.

Technical Specifications

Safety & Handling Instructions

While the coolant is non‑toxic compared to traditional ethylene glycol formulations, it should still be handled with care:

• Wear gloves and eye protection when mixing or refilling.
• Avoid ingestion; if accidental contact occurs, rinse thoroughly with water.
• Store in a cool, dry place away from direct sunlight and heat sources.

Environmental Impact & Sustainability

The Van Wezel 3002124 Coolant is formulated to minimize ecological footprint. Its phosphate‑free composition reduces the risk of eutrophication in water bodies, while its biodegradable nature ensures that any accidental release degrades safely over time.

Frequently Asked Questions

Can I use this coolant with a 100% antifreeze system?

No. The recommended ratio is 50 % coolant to 50 % distilled water for optimal performance and protection.

Is it safe for diesel engines?

Yes, the coolant’s chemistry is compatible with both gasoline and diesel engines that use conventional cooling systems.

What happens if I overfill the radiator?

Overfilling can cause pressure buildup, leading to leaks or damage to seals. Always fill to the marked level on the reservoir.

Can this coolant be mixed with other brands?

It is best to use a single brand for consistency in additive chemistry and performance characteristics.

By integrating Van Wezel 3002124 Coolant into your vehicle’s maintenance routine, you ensure reliable engine cooling, extended component life, and environmental responsibility—all while keeping your engine running at its best temperature range.