Van Wezel 3024913 Indicator

Van Wezel 3024913 Indicator – Precision Lighting for Modern Vehicles

The Van Wezel 3024913 Indicator is a high‑performance side flasher designed to meet the exacting standards of contemporary automotive lighting systems. Engineered with advanced LED technology, this component delivers reliable illumination, superior durability, and effortless integration into a wide range of vehicle models.

Key Features & Technical Specifications

• LED Technology: Utilizes high‑brightness LEDs that provide consistent light output while consuming minimal power. The LED array is engineered to withstand extreme temperature variations, ensuring dependable operation in both hot and cold climates.
• Color Options: Available in classic yellow (Giallo) and other color variants to match specific vehicle lighting schemes. Each variant maintains the same optical performance and longevity.
• Optical Design: Features a precisely engineered reflector system that directs light forward, enhancing visibility for oncoming traffic and pedestrians. The beam pattern complies with international safety regulations.
• Electrical Compatibility: Rated at 12 V DC, the indicator is fully compatible with standard automotive electrical systems. It supports both low‑voltage and high‑current applications without requiring additional circuitry.
• Dimensions & Mounting: Compact form factor (exact dimensions: to be specified by manufacturer) allows seamless installation in side, front, or rear positions. The mounting bracket is designed for quick attachment to existing vehicle housings.
• Durability: Encased in a robust polycarbonate housing that resists impact, vibration, and moisture ingress (IP65 rating). This ensures long‑term performance even under harsh driving conditions.
• Compliance & Standards: Meets European Union ECE R12 regulations for automotive lighting. The indicator also aligns with ISO 21379 standards for LED illumination quality and safety.

Vehicle Compatibility

The Van Wezel 3024913 Indicator is engineered to fit a broad spectrum of vehicle models, particularly those from the MERCEDES‑BENZ family. Commonly supported platforms include:

• W201 (190 Series)
• W202 (C‑Class Limousine)
• W124 (Stufenheck / Coupe)
• R129 (SL Roadster)

Its modular design allows for left or right side installation, making it suitable for both front and rear positioning. The indicator’s compatibility extends to aftermarket applications where OEM lighting solutions are unavailable.

Installation Guide

1. Preparation: Disconnect the vehicle battery to prevent electrical shorts. Remove any existing side flasher or bulb assembly from the intended mounting location.
2. Mounting Bracket Attachment: Secure the provided mounting bracket to the vehicle’s body using the supplied screws and washers. Ensure a tight fit to avoid vibration during operation.
3. Electrical Connection: Connect the indicator’s wiring harness to the vehicle’s side flasher circuit. Use color‑coded connectors or soldering as per the manufacturer’s instructions. Verify polarity to prevent reverse voltage damage.
4. Testing: Reconnect the battery and activate the turn signal lever. Observe the indicator for proper flashing frequency (typically 1–2 Hz) and brightness. Adjust alignment if necessary to achieve optimal beam spread.
5. Final Securing: Tighten all mounting screws and ensure that the housing is firmly seated against the vehicle body. Replace any protective covers or seals that were removed during installation.

Performance Benefits

• Enhanced Visibility: The LED array provides a bright, steady light that improves driver safety by clearly signaling lane changes and turns to surrounding traffic.
• Energy Efficiency: Low power consumption reduces strain on the vehicle’s electrical system, preserving battery life and supporting auxiliary systems.
• Long Service Life: LED technology typically offers a lifespan of over 50,000 hours, significantly surpassing traditional incandescent bulbs. This translates to fewer replacements and lower maintenance costs.
• Weather Resistance: The IP65 rating protects against water jets and dust ingress, ensuring reliable operation in rain, snow, or dusty environments.
• Regulatory Compliance: Adherence to ECE R12 and ISO standards guarantees that the indicator meets safety requirements for use on public roads across multiple jurisdictions.

Maintenance & Troubleshooting

Routine checks are recommended to maintain optimal performance. Inspect the indicator for:

• Physical Damage: Cracks or dents in the housing can compromise weather resistance.
• Electrical Connections: Loose or corroded wires may cause intermittent flashing or complete failure.
• Beam Alignment: Misalignment can reduce visibility; adjust as needed during initial installation.

If the indicator fails to flash, verify that the vehicle’s side flasher circuit is functioning and that the battery voltage remains within acceptable limits. Replace the LED module only if all other components are confirmed operational.

Why Choose Van Wezel 3024913?

• Trusted Brand: Van Wezel has a longstanding reputation for producing high‑quality automotive lighting solutions that prioritize safety and reliability.
• Precision Engineering: Each indicator undergoes rigorous testing to ensure consistent performance across all units.
• Versatility: Its universal design allows integration into both OEM and aftermarket setups, providing flexibility for vehicle owners and technicians alike.
• Cost‑Effective Longevity: The combination of durability and low energy consumption delivers long‑term savings without compromising safety.

Conclusion

The Van Wezel 3024913 Indicator exemplifies modern automotive lighting excellence. With its robust LED technology, strict compliance with international standards, and versatile compatibility across a range of vehicle models, it stands out as the optimal choice for drivers seeking reliable, high‑visibility side flashing solutions.