Van wezel 5836906indicator

Van Wezel 5836906 Turn Signal Light

The Van Wezel 5836906 is a high‑performance turn signal light designed for front‑right application on a wide range of vehicles, most notably the Volkswagen Passat (B5/B3). It delivers reliable illumination while maintaining a sleek, white aesthetic that blends seamlessly with modern automotive lighting systems.

Key Features and Specifications

• Model Number: 5836906
• Application: Front‑right turn signal (blinker) for passenger cars, vans, and light commercial vehicles.
• Color: White (non‑Xenon compatible)
• Light Source: High‑intensity LED array
• Voltage: 12 V DC
• Current Draw: Approximately 0.5 A per unit (typical for automotive LEDs)
• Operating Temperature Range: –40 °C to +85 °C, ensuring performance in extreme climates.
• Dimensions: Standard front‑right mounting size (exact measurements available from OEM specifications).
• Mounting Type: Snap‑in or screw‑in depending on vehicle body style; compatible with most factory and aftermarket housings.

Design and Construction

The Van Wezel 5836906 is engineered with a robust, lightweight housing that protects the LED array from vibration, moisture, and temperature fluctuations. The housing material is typically a high‑grade polycarbonate or ABS composite, offering excellent impact resistance while keeping weight low for optimal vehicle efficiency.

Inside, the LED module consists of multiple small LEDs arranged in a precise pattern to achieve uniform illumination across the entire indicator strip. This design reduces glare and improves visibility for other road users, enhancing safety during lane changes and turns.

Installation Guide

1. Remove Existing Indicator: Carefully detach the current front‑right turn signal from the vehicle’s body panel using a suitable socket or screwdriver. Note any wiring harness connections for later reattachment.
2. Prepare the Mounting Surface: Clean the mounting area to remove dust, grease, and old adhesive residue. Ensure the surface is dry before proceeding.
3. Attach the New Indicator: Align the Van Wezel 5836906 with the mounting points. If using a snap‑in design, press firmly until it clicks into place; if screw‑in, secure with the provided screws and torque specifications.
4. Reconnect Wiring: Connect the vehicle’s wiring harness to the indicator’s connector. Verify polarity and ensure all connections are tight to prevent electrical arcing.
5. Test Functionality: Activate the vehicle’s turn signal system to confirm proper operation. Check for consistent flashing, correct brightness, and absence of flicker or dimming.

Compatibility Overview

The Van Wezel 5836906 is specifically tailored for vehicles that require a white front‑right indicator** without Xenon compatibility. Commonly found in: