Vemo V30-72-0763 Brake

Product Overview

The Vemo V30-72-0763 Brake Sensor is a high‑performance wheel speed sensor designed for the ABS and traction control systems of Mercedes‑Benz E‑Class (W212) and CLS models. It delivers precise wheel rotation data, enabling the vehicle’s electronic stability program to react accurately during braking, cornering, and low‑traction conditions.

Key Features

• High Accuracy: Measures wheel speed with a tolerance of ±0.5 % across the full operating range.
• Robust Construction: Encased in a sealed, corrosion‑resistant housing that withstands extreme temperatures and road debris.
• Low Power Consumption: Operates on the vehicle’s standard 12 V supply with minimal current draw, preserving battery life.
• Fast Response Time: Signal latency under 2 ms ensures real‑time feedback to the ABS control unit.
• Easy Integration: Compatible with OEM wiring harnesses and mounting brackets; no additional adapters required.

Technical Specifications

Installation Guide

1. Safety First: Disconnect the vehicle’s battery to prevent accidental electrical discharge.
2. Remove Old Sensor: Detach the wheel, then unscrew the existing ABS sensor from its bracket. Carefully disconnect the wiring harness.
3. Position New Sensor: Align the V30-72-0763 with the mounting flange and secure it using the supplied screws. Ensure the sensor is flush against the hub to maintain signal integrity.
4. Reconnect Wiring: Plug the sensor’s connector into the vehicle’s harness, confirming a snug fit. Verify polarity if applicable.
5. Reassemble Wheel: Reinstall the wheel and torque the lug nuts to manufacturer specifications.
6. Test Functionality: Restore battery power and use a diagnostic scan tool to confirm that the sensor is transmitting correct wheel speed data. Check for any ABS fault codes.

Performance Benefits

The Vemo V30-72-0763 enhances vehicle safety by providing accurate wheel speed readings, which are critical for:

• Anti‑Lock Braking System (ABS): Prevents wheel lockup during emergency stops.
• Traction Control: Modulates engine output to maintain grip on slippery surfaces.
• Electronic Stability Program (ESP): Detects under‑ or over‑steer and applies corrective braking.

Compatibility Highlights

This sensor is engineered for the following Mercedes‑Benz platforms:

• E‑Class Sedan (W212) – 2011 to 2015 models
• CLS Coupe/Shooting Brake (C218/X218/S212)
• All variants equipped with standard ABS and ESP modules.

Quality Assurance

Manufactured under stringent quality controls, the V30-72-0763 undergoes:

• Environmental Testing: Exposure to temperature extremes, vibration, and humidity cycles.
• Electrical Verification: Signal integrity checks across full operating range.
• Mechanical Durability: Impact resistance and mounting torque tolerance assessments.

Maintenance Tips

• Inspect the sensor housing for cracks or corrosion annually.
• Ensure the wiring harness remains free of moisture; replace any damaged connectors immediately.
• Use a diagnostic tool to monitor wheel speed data during routine service intervals.

Conclusion

The Vemo V30-72-0763 Brake Sensor delivers reliable, high‑precision wheel speed measurement essential for modern vehicle safety systems. Its robust design, straightforward installation, and proven compatibility with Mercedes‑Benz E‑Class and CLS models make it a trusted component for maintaining optimal braking performance and vehicular stability.