Electrical installation
Suggestions for Electrical installation
Level Heat gun Hole saw Wire nut Cable lug Cable tie Drill bit Fish tape Cable clip Multimeter Nut driver Wire gauge Cable clamp GFCI tester Screwdriver Stud finder Wire cutter Cable cutter Cable puller Conduit body Hammer drill Tape measure Crimping tool Torque wrench Utility knife Wire stripper Cable stripper Circuit tester Conduit bender Conduit cutter Electrical box Soldering iron Terminal block Voltage tester Wire connector Bosch drill bit Conduit fitting Crimp connector Grounding clamp Milwaukee drill
A compact DIN rail terminal block with a 5.2 mm width and 48 mm height, designed for 24‑ampere connections. It supports conductors from 0.14 to 4 mm², operates between –60 °C and 105 °C, and tolerates up to 1000 V.
Discover the Jung JG 820 NAWSL socket outlet: a sleek, lockable design with a hinged cover. Perfect for secure and versatile power distribution in modern switchgear applications.
A compact 5‑pin bridge for UT2.5/ST2.5/QTC1.5 terminals, rated up to 24 A and 800 V. It offers a reliable, insulated cross‑connection with a 5.2 mm pitch, ensuring secure, low‑loss signal transfer in industrial circuits.
Compact blue feed‑through terminal block with a 5 mm slot and 20 A rating, accommodating up to four conductors from 0.08 mm² to 2.5 mm²; features a spring‑loaded clamp for secure, quick connections.
Securely bridge up to five terminals with WAGO 780‑455, a two‑pole insulated cross‑connector designed for terminal blocks. Its compact box‑bridge layout offers reliable isolation and easy installation, ideal for industrial control panels and simplified cable management.
The ELSO 112500 is a double button flush-mounted switch with 10 A capability. It features two push buttons that make contact when pressed, making it ideal for various electrical applications.
A white push‑button switch with a single normally open contact rated for 10 A, featuring a robust Contura housing and plug‑in terminal for easy installation in control panels.
The ELSO 455019 lockable outlet delivers a sleek grey AquaTop surface with IP44 water‑resistance, ideal for wet rooms. Its key‑secured design prevents accidental use while the clear label field lets you mark devices easily. Rated at 16 A, it safely powers everyday appliances.
A compact surface‑mounted switch in sleek grey, rated 10 A with an IP44 rating for damp environments. Its AquaTop design features a plug‑in terminal and a tactile button for easy control of lighting or appliances.
Jung LS 990 TV Aerial Socket Outlet is a high-quality cover for a coaxial antenna socket outlet. It is break-proof, ensuring long-lasting protection for your TV/radio socket. The Alpine white color adds a modern touch to any room.
Blind cover for window or door with support ring, in alpine white color, compatible with Jung AS series.
The FBS 2‑6 cross‑connector provides a tight 6.20 mm link between two pins on a DIN rail terminal block, with a sturdy metal body that ensures reliable, low‑loss signal transmission in control circuits.
A compact, 2‑pin fixed bridge (FBS 2‑5) designed for Phoenix Contact terminal blocks and plug‑in connectors. It provides a reliable cross‑connection with a 5.2 mm pitch for easy installation in industrial control panels.
A robust feed‑through terminal block with a 5.2 mm contact path and 24 A rating, featuring a spring‑loaded clamp for secure wire retention and easy installation on DIN rails or panels.
Dual‑shelf feed‑through terminal block for 2.5 mm² conductors, rated 24 A, featuring Klippon® Connect screw terminals in beige. Compact 5 mm pitch, ideal for tight panel mounting and reliable signal routing.
Cream white two‑way cover frame, 81 mm wide and 152 mm tall with an 11 mm depth, featuring a glossy finish and IK03 impact resistance. It clamps directly onto the surface, accommodating a 2‑gang switch set and meeting IP20 protection standards.
A robust grey feed‑through terminal block rated for 125 A, accommodating up to 16 mm² conductors with a secure two‑conductor design and integrated protective cover, ideal for high‑current industrial wiring.
WAGO 280-901 - 2-conductor feed-through terminal block, grey, with pull spring configuration and rated for up to 24A. Suitable for electrical installation kits with a 5mm spacing, available in packs of 100 pieces.
Orange end/partition plate for WAGO terminal blocks, 2.5 mm thick, designed to secure and separate conductors in a 2‑conductor feed‑through setup, providing a clean, insulated termination point.
Smooth aluminum rocker for Venetian blind controls, fits System M. Sleek design, durable finish, easy installation, combines switch and button in one unit. Ideal for modern homes, it offers reliable operation and a clean look that complements any décor.
Blue 8 mm WAGO 782‑604 feed‑through terminal block handles two conductors up to 6 mm² and delivers 41 A, featuring a spring‑loaded contact for secure, low‑resistance connections in tight assemblies.
A sleek matte plastic 4‑way intermediate rocker switch, rated for 10 A at 250 V with a 32 mm mounting depth and IP20 protection. It offers clean, uncluttered control without built‑in lighting or text labels.
Schneider Electric's XB5AS8442 is an emergency stop switch with a lockable round reset function. It features a steel front ring, a red mushroom button, and a 120 V AC 6 A breaker.
A slim 12 mm neutral disconnect block featuring a spring‑loaded push‑in cage clamp that secures conductors up to 6 AWG, rated at 250 V and 105 °C, ideal for DIN TH35 rail mounting.
Reliable 24 V AC/DC switching relay with a 6 A current rating, featuring a single normally‑open contact and screw‑terminal connections for straightforward wiring; its compact DIN rail design suits industrial control applications.
The Kaiser Elektro 1159-25 Filler is a round cover with a diameter of 72mm for flush mounted boxes. It features a break-proof spring mechanism and is suitable for use with junction boxes or printed circuit boards.
The LogiLink SH0106 is a switchable Wi-Fi socket with thermostat control. This indoor socket connects to your home Wi-Fi network for remote and scheduled on/off switching of appliances.
A sleek alpine white dual rocker cover plate featuring a built‑in light guide for clear illumination, perfect for home automation switches; its durable plastic construction ensures long‑lasting performance in any interior setting.
CLIPFIX 15 is an end clamp designed to securely fasten terminal blocks on DIN rails. Made of high-quality plastic, it comes in a set of 50 pieces and is compatible with Phoenix Contact's rail mounting systems.
