Electrical installation
Suggestions for Electrical installation
Level Heat gun Hole saw Wire nut Cable lug Cable tie Drill bit Fish tape Cable clip Multimeter Nut driver Wire gauge Cable clamp GFCI tester Screwdriver Stud finder Wire cutter Cable cutter Cable puller Conduit body Hammer drill Tape measure Crimping tool Torque wrench Utility knife Wire stripper Cable stripper Circuit tester Conduit bender Conduit cutter Electrical box Soldering iron Terminal block Voltage tester Wire connector Bosch drill bit Conduit fitting Crimp connector Grounding clamp Milwaukee drill
The Hager ST303 is a versatile bell transformer with power output of 8V/12V and an amperage capacity of 1 A. It operates on 230V AC input, providing reliable energy conversion for doorbells and other devices.
Phoenix Contact PT 6 QUAT feed-through terminal block, 8.2mm width, rated current 41A, color gray, pack of 50 pieces.
End/partition plate for terminal blocks, providing a secure and organized connection point.
The WAGO 2010‑434 cross‑connector lets you join two contacts in a 2‑pole terminal block without soldering, offering a tight, low‑resistance fit that keeps wires organized and connections stable.
A robust multilevel installation terminal designed for 2.5 mm² conductors, featuring a slide‑link (N) connection system, N‑type disconnecting capability, and a durable grey housing suitable for floor or panel mounting.
Ground terminal block with a single pole and 6.2 mm contact size. Supports up to 32 A per conductor, suitable for 4‑conductor feed‑through applications. Pack of 50 units in yellow/grey or green‑yellow variants.
Discover the WAGO 2002-1407 Ground Terminal Block: A versatile 1-pole terminal block designed for a 5.2 mm pull spring configuration. Rated at 24A and compatible with 2.5mm² wire, this yellow/grey terminal ensures secure connections.
Ground terminal block with a single pole and 12 mm diameter, rated for 76 A and suitable for conductors up to 16 mm². Features a 3‑conductor feed‑through design in yellow/grey or green/yellow for secure grounding connections.
Securely connect three conductors up to 2.5 mm² with this 24A rated, 1‑pole WAGO ground terminal block. Its 5.2 mm push‑in design offers quick installation and reliable grounding on DIN rail systems.
Blue WAGO 2001‑1204 feed‑through terminal offers secure 18 A connections for 0.25–1.5 mm² conductors, featuring a compact 4.2 mm body and quick‑push design for reliable wiring in DIN rail setups.
Securely connect earth conductors up to 2.5 mm² with this double‑deck terminal block, featuring a 5.2 mm pitch and green/yellow identification for clear grounding in any installation.
Feed-through double-level terminal block with 3.5mm connection and 16A current rating, ideal for secure and efficient electrical connections.
Secure your WAGO terminal block with this blue end/partition plate, 48.5 mm long and rated for 800 V, 18 A. It mounts on a TH35 rail, fits two terminals per layer, and meets UL 94 V0 fire‑rating standards.
Double‑deck feed‑through terminal block, 3.5 mm width, 13.5 A rating, accepts up to 1 mm² wire, grey finish, 50 units per pack, ideal for compact cable connections.
3-conductor feed-through terminal block with 6.2mm width and 32A rating, suitable for conductors 0.5-4.0mm², grey color.
Securely connects two conductors up to 2.5 mm² with a 24 A rating. The 5.2 mm DIN rail mount offers compact, color‑coded green/yellow terminals for reliable earth grounding in industrial circuits.
The PTN 4 neutral disconnect terminal block features a 6.2 mm screw‑type connection, compact 44.8 mm height, lightweight 11.3 g, enabling secure isolation of the neutral conductor in low‑voltage circuits.
Securely connect three conductors up to 1 mm² with the WAGO 2000‑1301 feed‑through terminal block, rated 13.5 A and featuring a 3.5 mm contact size in durable grey housing.
Orange end/partition plate set for WAGO 2000 terminal blocks, 25 units each with a 0.7 mm thick profile that ensures secure mounting and easy cable management in industrial control panels.
Compact 13 A single‑pole breaker with a Char‑B trip curve, rated at 6 kA for industrial use. Its 70 mm body fits tight spaces while delivering reliable overload protection and fast reset capability.
The Siemens 5SY6106-6 is a 6 A miniature circuit breaker, compatible with both 230 V and 400 V electrical systems. Its compact design incorporates a single pole and a 1-pin connection.
The Phoenix Contact PT 2,5 feed-through terminal block is a 5.2mm quick-connect grey terminal with 24A capability designed for reliable connections in various applications.
A robust four‑pole residual current breaker delivering 40 A at 500 mA with a 6 kA short‑circuit rating, designed for DIN rail mounting and reliable fault protection in industrial circuits.
Securely connect up to three grounding conductors with the PT 10‑TWIN‑PE ground terminal block, featuring a 10.2 mm wide push‑in design for quick installation and reliable continuity in green‑yellow housings.
A durable ground terminal block with a 5.2‑mm width and 100.9‑mm height, operating from –60 to +105 °C and rated at 400 V, designed for secure protection conductor connections in industrial setups.
Flush‑mounted black plastic junction box, 60 mm diameter and 66 mm depth, holds up to four screw domes for secure device connections. The IP2X rating protects against dust while remaining lightweight and easy to install in walls.