Drill Bit Sets
Suggestions for Drill Bit Sets
Forstner bit SDS drill bit Step drill bit Tile drill bit Wood drill bit Countersink bit Metal drill bit Spade drill bit Twist drill bit Cobalt drill bit Forstner bit set Diamond drill bit Masonry drill bit SDS drill bit set Step drill bit set Tile drill bit set Wood drill bit set Bosch HSS drill bit Bosch drill bit set Countersink bit set Irwin HSS drill bit Irwin drill bit set Metal drill bit set Spade drill bit set Twist drill bit set Brad point drill bit Cobalt drill bit set DeWalt HSS drill bit DeWalt drill bit set Makita HSS drill bit Makita drill bit set Diamond drill bit set Masonry drill bit set Pilot point drill bit Milwaukee HSS drill bit Milwaukee drill bit set Brad point drill bit set Carbide-tipped drill bit Pilot point drill bit set Titanium-coated drill bit
Blue Spot Tools (5055618369051 / 20338)
Silverline (5456859791340 / 794314)
Silverline (0795622813199 / DS54)
Silverline (5060012954376 / 993023)
Makita (5054480303163 / ZMAK-P-67832)
Wood Beaver is ideal for: Producing cable / pipe passages through timber Can be used in: Hardwoods, softwoods, veneered chipboard, plywood and chipboard Set contains 16/20/25/25mm Wood Beaver
Milwaukee (4002395371259 / 4002395371259)
Electroplated diamond drill bit With water reservoir and 10 fixing pads Suitable for any standard chuck drill For wet drilling Complete wet drilling kit
Tile bits are point ground for added grip on start-up to reduce slippage and wander All products supplied as a twin pack with a same size masonry drill for drilling fastener holes in substrate behind the tile.Range of fastener sizes that c
SupaTool (5017193518798 / MDB8S)
Standard: DIN338RNFinish: Black oxide, dry rust resistant coating Material: HSS - 4354Point Angle: 118°Flute: Standard helix, right hand spiral
HSS-R roll forged 4241 high speed steel Manufactured to DIN338 with 118 degree point Metric: 15 x 1 and 1.5 mm, 10 x 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 5 and 6 mm Metric: 5 x 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10 mm Imperial: 10 x 1/8 in
CYL-3, 18x100x160Content: CYL-3, 18x100x160EAN: 3165140186841
Trend (5027654528266 / BL/DRILL/95)
Metal tip starts drilling on contact Innovative tapered web greatly reduces breakage Cleaner, more accurate, burr-free holes Permanent size markings located above the shank For drilling sheet or thin materials
Fast cutting of all grades of hard and soft tiles.Raised diamond grit edge for easy starting.Tough brazed diamond for long life.Reverse spiral increases cutting speed.Auto slug ejection slot for continuous cutting.
HSS-G DIN338 2,5x30x57Content: 10x HSS-G DIN338 2,5x30x57EAN: 3165140290531
Heller (5054186630471)
Diameter: 9Total Length: 118Working Length: 76
Dapetz (5056042006178 / DP00717) | HSS steel
Silverline (0793518847877 / 427650)
Newsome (5030952037712 / DHS5B) | X 180mm, 5pc HSS Blacksmiths Drill
These have a long lasting working capacity Uses a 135º Split Point Design25Pc HSS Drill bits Set1,1.5,2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,7.5,8,8.5,9,9.5,10,10.5,11,11.5,12,12.5 and 13mm Fully Precision ground
Diameter: 8.5Total Length: 117Working Length: 75Reliable HSS drill bit with constant spiral hardness Precision Drill Bit, Conforms to DIN 338 RN
Designed for drilling into brick and masonry Tungsten carbide tips, cold forged, satin finished Hardened and tempered high carbon steel shanks Contains drill sizes: 4mm, 5mm, 6mm, 8mm and 10mm Masonry drill bit it has power tool
Professional quality from Heller Highly accurate and durable with best cut in metal Precision grinding according to DIN 338 RN for an excellent dimensional accuracy of the bore Optimal centering when drilling is achieved by cross-grou
Suitable for both soft wall tiles, for floor tiles on very hard floors like porcelain stoneware Note: rotary drilling. Always work with water cooling. Only work with a cordless drill Diameter in mm: 5/6/7/8Total length in mm: 65
Heller (5054480420440)
Hard Alloy Tipped For drilling concrete, wallboard, stone, brick and slate For use in electric & cordless drills Drill Sizes : 8,10,12 mm Drill bit length : all 400mm
Precision ground high Titanium Plated drill bits The drill bits are Titanium Nitride coated for extended working life Suitable for quick change chuck systems and hex receivers
Proven reliable Clarke technology Lightweight construction at just 0.33 Kgs High performace for the home or tradesman
Proven reliable SPARKY technology Lightweight construction at just 9.7 Kgs High performace for the home or tradesman
Lightweight Ideal for wood, metal, plastic and stone On / off toggle switch Ease of use Rotation speed: 8,000 to 30,000 rev / min, Total Weight: about 1.5kg
Filters