Milling Accessories
Suggestions for Milling Accessories
V-bit End mill Face mill Collet nut Shell mill Slot drill Hollow mill R8 end mill Tool holder Chamfer mill Collet chuck HSS end mill Slitting saw Flat end mill Milling arbor Milling chuck T slot cutter Carbide insert Milling collet Milling cutter Milling insert Dovetail cutter End mill holder Square end mill V-groove cutter Carbide end mill Indexable insert Shell mill arbor Arbor for milling Roughing end mill Ball nose end mill Finishing end mill Two-flute end mill Face milling insert Four-flute end mill Side milling cutter TiN coated end mill Three-flute end mill AlTiN coated end mill Milling insert holder
High quality ball bearing for free running against an edge to prevent heat build up. - 6mm inside diameter for use on bottom mounted trimmer and profiling cutters. - 19mm outside diameter for matched fit to trimming and templating cutters. - Bearings are
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. Shank mounted bearing. - Cutter will neatly cut grooves on door or frames to accept a weatherseal. - Cutter specification :- Diameter 36mm, Cut length 2.5mm, Ov
As part of the Trend Trade Range, the TR12X1/4TC cutter is designed for use with hinge jigs on a regular basis, and offers durability and flawless performance PTFE coating on the body helps reduce resin, friction and subsequent heat build-up in u
High quality, precision tool - Manufactured from fully ground M2 steel - Measures 13mm diameter by 25mm length - Offer better economy, quality and performance - Made in Britain - More efficient than HSS M-2 or Cobalt Annular , rotabroach style or mag dril
High quality, precision tool - Manufactured from fully ground M2 steel - Measures 12mm diameter by 25mm length - Offer better economy, quality and performance - Made in Britain - More efficient than HSS M-2 or Cobalt Annular , rotabroach style or mag dril
40mm diameter X 4mm depth of cut slotter designed for quick and easy for biscuiting applications in kitchen worktop fitting and general jointing. - 3 bearings supplied to cover standard biscuit sizes of 0, 10 and 20 allowing bigger and more delicate joint
Dormer S904 carbide 4 flute end mill/milling cutter with bright finish, DIN 6535HA shank, standard length end mill, multi-flute end mill, pack of 1.
High quality, precision tool Manufactured from fully ground M2 steel Measures 28mm diameter by 25mm length Offer better economy, quality and performance Made in Britain
High quality, precision tool Manufactured from fully ground M2 steel Measures 18mm diameter by 25mm length Offer better economy, quality and performance Made in Britain
High quality, precision tool Manufactured from fully ground m2 steel Measures 14mm diameter by 25mm length Offer better economy, quality and performance Made in Britain More efficient than HSS m-2 or Cobalt Annular, rota b
High quality, precision tool Manufactured from fully ground M2 steel Measures 46mm diameter by 25mm length Offer better economy, quality and performance Made in Britain
Trend - Dovetail Cutters - CraftPro Router Cutters
The Trend Dovetail Cutter with a 99° angle and 9.5mm diameter is a high-quality cutting tool designed for precision woodworking tasks such as making dovetails. Its sharp, durable blade ensures smooth cuts and long-lasting performance.
High quality, precision tool - Manufactured from fully ground M2 steel - Measures 50mm diameter by 25mm length - Offer better economy, quality and performance - Made in Britain
High quality, precision tool - Manufactured from fully ground M2 steel - Measures 32mm diameter by 25mm length - Offer better economy, quality and performance - Made in Britain
High quality, precision tool - Manufactured from fully ground M2 steel - Measures 26mm diameter by 25mm length - Offer better economy, quality and performance - Made in Britain
High quality, precision tool - Manufactured from fully ground M2 steel - Measures 17mm diameter by 25mm length - Offer better economy, quality and performance - Made in Britain
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.For housing, grooving and mortising.Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long
High quality, precision tool Manufactured from fully ground M2 steel Measures 27mm diameter by 25mm length Offer better economy, quality and performance Made in Britain
High quality, precision tool Manufactured from fully ground m2 steel Measures 15mm diameter by 25mm length Offer better economy, quality and performance Made in Britain More efficient than HSS m-2 or Cobalt Annular, rota b
(5016086224228 / 7610874)
Frame for routing drainer grooves in solid timber and solid surface worktops. - Made from 12mm hardwearing CNC machined phenolic. - X and Y-axis ski and carriage allows forward and back, and side to side movement. - Provides a 0.5 degree fall. - Router ca
TCT cutting edges - Strong, hardened steel shank - Twin fluted for smooth finish - For biscuit joints, slots and grooves - Maximum 12,000 rpm
Purpose made for stair housing jigs. - Ensures tight fit of Tread in string. - Craft Pro range Tungsten carbide tipped router cutter bits
Precision-engineered Dormer C247 end mill/milling cutter with 4 flutes, bright finish, diameter 13.0 mm, and single pack.
Dormer (7320760572573 / 0572573)
Dormer S501 carbide 5.00mm ball nosed end mill with 2 flutes for slotting, suitable for various materials.
Dormer C110 C11040.0 HSS-E-PM 2 Flute Slot Drill/Milling Cutter with DIN 1835B Shank and Diameter of 40.0 mm, packaged individually.
HSS-E 3 flute slot drill with bright finish, 16mm cutting diameter and flatted shank for precise milling operations.
Dormer (7320760353691 / 0353691)
Dormer (7320760354759 / 0354759)
Dormer (7320760609385 / 0609385)
Dormer (7320760346150 / 0346150)
The Dormer C40014.0 Series C400 HSS-E 4 Flute Roughing End Mill/Milling Cutter features a bright finish and a DIN 1835B shank with a cutting diameter of 14mm.
Dormer (7320760068465 / 0068465)
High-speed steel end mill with Alcrona coating and 4 flute design for efficient roughing operations, featuring a 12mm cutting diameter and DIN 1835B shank.
Filters