Router Accessories
Suggestions for Router Accessories
Collet Dust hood Edge guide Rabbet bit Depth gauge Insert plate Router fence Bit extension Guide bushing Collet adapter Template guide Cove router bit Ogee router bit Bevel router bit Upcut router bit Router depth stop Spiral router bit T-slot router bit Beading router bit Carbide router bit Chamfer router bit Downcut router bit Pattern router bit Dovetail router bit Slotting router bit Straight router bit V-groove router bit Dust collection hood Roundover router bit Flush trim router bit Compression router bit Template guide bushing Edge forming router bit Raised panel router bit Spiral upcut router bit Laminate trim router bit Bearing guided router bit Carbide tipped router bit Router table insert plate Spiral downcut router bit
Highly economical - Made from Tungsten Carbide - Torx key fitting - East to use - Long lasting
Trend (5027654019474 / S49/1X1/4STC) | Carbide Rasp, Trend S49/1X1/4STC
Replacement solid carbide blades. - Supplied in a protective plastic box. - Professional range Tungsten carbide tipped router cutter bits
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 9.5mm diameter X 12.7mm cutting depth shank mounted bearing guided trimmer. Ideal for flush trim laminate and veneer work. - Extra care must b
Self guiding rebate cutter ideally suited to produce rebates, lap joints, tongues and rebated corners. - Cutter supplied with four bearings to achieve four different rebate sizes. Four additional bearings are available to allow four alternative rebate dep
Trend (5027654051412) | Trend 46/521x1/4tc
Cutter for false panels or edge mould. - Curved work possible in fixed head router & copy - follower.
This product is a 13/3 X 1/4 Tungsten Carbide Radius Cutter designed for cutting edges and curves with precision and efficiency. It has a 10.0mm radius, ideal for creating coves or joints in woodwork.
16.7mm diameter X 7.7mm cutting depth bearing guided 2mm radius Ovolo cutter for fine detailing applications. With two flute Dnamic TCT tips for all wood based materials. - Two bearings supplied for quirked single or double shoulder Ovolo profile or round
Trend (5027654059364 / C001DX1/4TC) | Trend C001DX1/4TC
Trend (5027654038352 / U*SET/MT1X1/2TC) | Shank for correct, 1/2in shank, 1/2in and 5/8in, 1/4in to 5/8in, Piece MT/JIG cutter
5-Piece straight bit set - Tungsten carbide tipped - Long reach for deeper cuts - 1/4-Inch shank - Ideal for use with Trend's mortise and tenon jig
Trend - Collet extension 8mm collet nut set 8mm - CE/CNS/8/8
Trend (5027654502242)
Fits directly to Trend T3, T4, T5, T5 Mk2, T9, T10 And T11, and some other light duty routers. - Will fit other makes when used with GB/5, GB/plate or Uni Base sub-base. - Guide bush guides the router when using a template
A precision multi-slit one piece collet 8mm for use with the Trend T10 anf T11 Routers. - Product does not include the collet nut. - Collet specification :- Diameter 8mm.
Trend (5027654056608) | WRT/1 Pair
Trend (5027654059555 / C121NX1/4TC) | Trend C121NX1/4TC
Replacement solid carbide blades. - Supplied in a protective plastic box. - Does not have bevelled ends for clearance. - Professional range Tungsten carbide tipped router cutter bits
Manufactured from carbon steel with carbide tip and nickel plated - Sizes: 3.0, 4.0, 5.0, 6.0, 8.0, 10, 12mm - For use with variable speed drills
Trend (5027654522769 / WP-LOCK/T/SET) | Trend wp-lock/t/set
Trend (5027654034071 / SET/MT2X8MMTC) | 8mm shank, Shank for correct
Allows for improved guide bush to cutter concentricity. - Outside diameter 16mm, Inner diameter 14.9mm, plate diameter 60mm.
Trend C172MX1/2TC is a Two Flute Cutter with a diameter of 12mm and length of 63mm, designed for use in cutting tasks. It has an overall length of 100mm.
Trend (5027654032374) | Trend tr12x8mmtc
Trend (5027654506042 / RBT/CUT/1)
Trend (5027654059401 / C005AX1/4TC) | Trend C005AX1/4TC
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 9.5mm diameter X 6.35mm cutting depth shank mounted bearing guided trimmer. Ideal for flush trim laminate and veneer work. - Extra care must b
Comprises three sets of cams, bolts & fixings - Design REG. No. 000336763 - Country of Origin : United Kingdom - The Package Height of the Product is 50.0 millimeters
Trend (5027654017906 / COLL/14) | Collar Packs, Inch Diameter
Trend (5027654135785 / GB30/A)
Trend (5027654552322 / SNAP/DB/PK1) | Drill Bits, Drill Bit, Trend SNAP/DB/PK1 Snappy, Trend Snappy Drill, Spare Drill bits
CARBITOOL (9314350003224) | Solid carbide
Two sizes available to suit 4mm thick strip of widths 10mm or 15mm.Intumescent strip is used to create an effective barrier to both fire and smoke.Choose alternative bearings to suit other thicknesses of intumescent strip.
High quality solid carbide replacement cutters for Trend RT/12, RT/12M, RT/13, RT/14, RT/70, RT/72, straight trimmer cutters.Blades can be rotated 180 degrees giving two cutting edges for longer lifespan between cutter changes.Ideal for
Filters