Router Accessories Trend
Active Filters
Trend
Suggestions for Router Accessories Trend
Collet Dust hood Edge guide Rabbet bit Depth gauge Insert plate Router fence Bit extension Guide bushing Collet adapter Template guide Cove router bit Ogee router bit Bevel router bit Upcut router bit Router depth stop Spiral router bit T-slot router bit Beading router bit Carbide router bit Chamfer router bit Downcut router bit Pattern router bit Dovetail router bit Slotting router bit Straight router bit V-groove router bit Dust collection hood Roundover router bit Flush trim router bit Compression router bit Template guide bushing Edge forming router bit Raised panel router bit Spiral upcut router bit Laminate trim router bit Bearing guided router bit Carbide tipped router bit Router table insert plate Spiral downcut router bit
The Trend CRAFTPRO Intumescent Strip Router Cutter is a 1/4 inch shank tool designed for creating recesses in intumescent strips. This 24mm x 10mm cutting head provides precise and efficient cuts, making it ideal for fire-stopping applications.
12.7mm diameter X 63mm cutting depth; for routing post formed joints with worktop jigs and other deep profiling work. - No plunge tip so only suitable for worktop jointing or other applications working in from an edge. - Increased cut length, perfect for
3 degree undercut router bit with shank mounted bearing guide for routing the leading edge on doors to allow a tight fit against jamb. - Suitable for use in medium - heavy duty Routers with a minimum wattage of 1500 watts. - Cutter specification :- diamet
Trend C306X1/2TC is a flat bottom draining groove cutter designed for creating channels in wooden boards. The Trend CRAFTPRO radius router cutter comes in various sizes, including 16mm, 20mm, and 1/2.
The Trend CRAFTPRO Two Flute Straight Router Cutter is a 12.7mm diameter, 31.8mm cut length, and 1/4 inch shank tool made from steel with tungsten carbide tips for increased durability and performance.
The product is a bearing guided trimmer router cutter with dimensions of 6.35mm x 25.4mm and a 1/4TC shank size, designed for precision cutting in woodworking projects.
Two flute carbide TCT tips for cutting biscuit slots in timber and timber based materials. - Supplied with three interchangeable bearings covering biscuit sizes 0, 10 and 20 covering furniture and joinery applications. - 1/2in shank, perfect for bigger ro
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - 6.3mm wide X 25.4mm cutting depth with bottom cut feature for increased diversity including light morticing. - Matched 1/4in impe
Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. - Bearing guide ensures the correct 4mm depth and 15mm width is always achieved to meet Fire Regulations. - 1/4in shank, ideal for easy con
Dimension C: 16 mm - Dimension D: 12 mm - Screw size: no 10 - Body diameter: 19 mm
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 25.4mm cutting depth bottom bearing guided trimmer. Accurately and cleanly flush trims laminate and veneer work. - 1/4in sha
Excellent value for money, offering a range of the most popular cutters for decorative and constructional woodworking. - The set contains three non-bearing cutters comprising 2 straight cutters, 6.3mm and 12.7mm diameter a 45° 'V' groove and three bearin
Suitable for various materials such as softwood, hardwood, chipboard, plywood and MDF - Excellent value for money - Supplied in a robust Secure plastic carry case with a handle grip
TUNGSTEN CARBIDE: Each cutter has solid tungsten carbide cutting edges for increased performance and durability in solid timber and abrasive sheet materials including ply and MDF - EXCELLENT VALUE: High quality router accessory with long lifespan and cons
12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick.Cut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core lamina
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.1/8in imperial radius for matched replication. Leaves perfect fine round over detail for a contemporary eased edge profile
The Trend Craft C076X1/4TC Pro 1/4in shank bearing-guided round over router cutter features a 6.3mm radius and two flute carbide tips for precision cutting.
Tungsten carbide chamfer cutter for precise beveling, with pin-guided design and 45-degree cutting angle.
A versatile sub-base for trim routers, designed to fit 1/4 inch models, providing enhanced compatibility and stability.
Trend UNIBASE 150mm Universal Plunge Router Sub-Base is an adapter that converts plunge routers for edge routing on a table. It provides a quick and easy solution for creating smooth edges, allowing for precise and consistent cuts.
The Trend Kitchen Worktop Jig Offset Scriber is a precision tool designed for accurate worktop installation, helping you achieve perfectly aligned edges.
Trend CRAFTPRO Two Flute Straight Router Cutter, 6mm diameter shank, 1/2 inch length, ideal for precision woodworking.
The Trend CRAFTPRO Two Flute Straight Router Cutter is a precision woodworking tool designed for cutting and shaping wood. With its 20mm diameter, 20mm length, and 1/4 inch shank, this cutter provides accurate and efficient results.
Trend's professional two flute straight router cutter is designed for precision and efficiency, with a diameter of 22mm or 25mm and a shank size of 1/2.
The Trend 3/83M x 1/2 TCT Two Flute Cutter is a durable 12.7mm x 50mm cutter designed for precision and efficiency in woodworking projects. Featuring two flutes, it's perfect for creating clean edges and intricate designs on worktops and other surfaces.
The Trend CRAFTPRO Radius Router Cutter is a versatile tool designed for cutting radius edges on wood and other materials. Its adjustable depth control allows for precision in every cut, while its durable construction ensures long-lasting use.
Trend CRAFTPRO Dovetail Router Cutter 12.7mm x 12.7mm, 1/4 shank. Suitable for creating precise dovetails in woodworking projects.
Trend SNAP/PC/38 is a plug cutter that produces high-quality wooden dowels for joinery and decorative purposes. It has a 3/8 inch cutting capacity, allowing it to create clean and precise cuts in various types of wood.
The Trend 46/05 x 1/4 TCT 90° Template Profiler is a precision tool designed for use with guided trimmers and routers. It features a 6.3mm diameter and measures 12.7mm in length, making it ideal for cutting straight lines and intricate patterns.
Trend Bearing Guided Template Profiler Router Cutter with 46/09 x 1/2 TCT 90° Shank Mounted design, measures 19.1mm x 50mm, ideal for accurate routing and profiling.
Trend TRE7E314TC is a 7E/3 x 1/4 inch TCT Pin Guided Round Over Router Cutter with an 8.0mm radius, designed for use in woodworking projects to create smooth and precise edges.
This Trend bearing-guided ovolo and round router cutter is designed to create a smooth, rounded edge with a radius of 16mm. With a cutting diameter of 46/160 x 1/2, it is compatible with various tools.
The Trend Professional 2-flute straight router cutter is designed for precision woodworking, boasting a sharp two-flute design with dimensions of 19.1mm x 25mm and a 1/4 inch shank size for compatibility with various routers.
The Trend Professional Two Flute Straight Router Cutter is a durable and precise cutting tool with a 16mm diameter and 1/2 inch shank. It features a two flute design and tungsten carbide tips for long-lasting performance.
This product is a two-flute straight router cutter from Trend Professional, featuring a 3.2mm diameter and an 11mm cutting length. It is designed for precise cutting in various materials, with its 3/10 x 1/4 inch shank size fitting most standard routers.
Filters