Router Accessories
Suggestions for Router Accessories
Collet Dust hood Edge guide Rabbet bit Depth gauge Insert plate Router fence Bit extension Guide bushing Collet adapter Template guide Cove router bit Ogee router bit Bevel router bit Upcut router bit Router depth stop Spiral router bit T-slot router bit Beading router bit Carbide router bit Chamfer router bit Downcut router bit Pattern router bit Dovetail router bit Slotting router bit Straight router bit V-groove router bit Dust collection hood Roundover router bit Flush trim router bit Compression router bit Template guide bushing Edge forming router bit Raised panel router bit Spiral upcut router bit Laminate trim router bit Bearing guided router bit Carbide tipped router bit Router table insert plate Spiral downcut router bit
Trend (5027654025574)
Trend (5027654020593 / SP-PSC/10A)
TREND GB500 guide BUSH T9 50 mm OD
Trend (5027654038543 / CR/KFP/1) | Plywood and certain hardwoods
Premium tungsten carbide cutting edges - Ideal for grooving, rebating & mortising - Balanced, single-piece high-strength body - Twin flutes for clean, precise cutting
Carbide slot cutter - It must be used with spindle - Features 2.5 mm slot width and 40 mm overall diameter - Measures 8 mm shank diameter and 6 mm cutting diameter
Festool (4014549010716 / 491385) | Avececrou M62 bearings
Trend - For Template work - Professional TCT Cutters
HW rounding cutter - 490096 HW R6-OFK
HW Rounding milling tool - 490093 HW R3 - OFK
Edge trimming cutter with ball bearing on top makes 1:1 copying of templates possible - Ball bearing - Upper; D = 19.05 mm - NL - 25 mm and GL - 62 mm - Alpha - 0 degree
Tungsten carbide tipped straight - 20 mm cut length and 60 mm overall length - 8 mm shank diameter and 30 mm
Festool (4014549000625 / 490965)
Festool (4014549076194 / 491095)
Trend (5027654018774 / PSC/40X1/2TC)
Timber thickness with 6.3 groover Min 18.0mm,Max 22.0mm,With4.0 groover Min 16.0mm, Max 18.0mm. - R 3.5mm,D41.0mm,C 11.0mm,C2 4.0mm. - This cutter must be used in a router table.
The HSS drill bit is gripped by a spring steel collet into the Hex shaft. - The Hex shanks snap into the quick chuck.
Trend (5027654018699 / PSC/1X8MMTC) | Classic prof/scribe
Trend - With tip sheared up and down - Professional TCT Cutters
Trend (5027654007143 / 4/8X3/8TC)
Trend (5027654019405) | Cutting diameter
Festool (4014549001394 / 491029) | HW HW S8
Trend (5027654012574 / 7/99X1/2TC)
Trend (5027654019375 / S3/12X1/4STC) | Cutting diameter, 3mm Diameter
Durable, precision ground HSS spiral-cutting blade generates consistent results over a long service life - Self-aligning blade for quick and easy blade changes - loosen 3 screws, replace the blade, re-tighten screws and you're done - Replacement blade for
Length : 2424mm - Product code : 491622 - Brand : FESTOOL - Product name : FESTOOL 491622 FS 2424/2-LR32 Guide Rail - Manufacturer : FESTOOL
Fine adjustment - 488,754
FE-FS/OF/KF - Fine adjustment - 488,754
FE-FS/OF/KF
Festool (4014549159101 / 487160)
Festool (4014549013632 / 491712)
Original Festool Extension table VL - supplied in a carton - Easy to use
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. - Cutters with prefix S are Solid Carbide. - Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass.
Festool (4014549001783 / 491074)
Drilling tool HW with 8 mm shank HW S8 D8/19 FESTOOL.
TCT cutting edges - Strong, hardened steel shank - Twin fluted for smooth finish - For general routing, grooving, rebating, dados, mortising and edge trimming - Maximum 13,000 rpm
Filters